Understanding Malta and Its Types
Malta is a binding agent used in construction materials to create strong bonds between different components. The term “malta” encompasses various types of cementitious mixtures, each with its unique characteristics and uses. In this article, we’ll delve into the world of malta, exploring its different types, proportions, and dosages for making cement mortar, lime mortar, and bastard plaster.
Types of Malta: A Brief Overview
There are three primary types of malta:
- Bastard Plaster: A mixture of calcine and cement in variable quantities.
- Cement Mortar: Obtained from cement, often used for structural applications.
- Lime Mortar: Derived from hydraulic lime or hydrated lime (also known as quicklime).
Concrete is a type of malta or conglomerate cementitious mixture. Its name originated from the use of air lime as the primary binding agent in the past.
The Evolution of Concrete
In modern construction, cement has become the primary binding agent for preparing concrete or malta. This shift was driven by the replacement of lime with gypsum (a rare solution today) for powdered concrete. However, other masonry mixtures have been given different names over time, giving rise to bastard plaster and various types of plaster.
The Importance of Proper Proportions
When it comes to making mortar, using the right proportions of inert and binding agents is crucial. Sometimes additives are added to facilitate adhesion, while other times resin is used to improve performance based on use. However, if your goal is to create a load-bearing concrete structure, it’s recommended that you consult an expert.
A Word of Caution
Designing a load-bearing concrete structure requires careful calculation of steel reinforcement, its arrangement, material quality, and impasto calibration. If you’re new to making mortar, it’s essential to start with small projects and gradually move on to more complex applications.
Making Mortar: A Step-by-Step Guide
For instructions on how to make mortar (by hand or using a cement mixer), please refer to our guide article “How to Make Mortar.”
Proportions for Different Types of Malta
Here are the dosages for preparing your own mortars:
- Bastard Plaster: Sand (10 parts), hydraulic lime (3 parts), cement (1 part), water (3 parts)
- Lime Mortar: Sand (6 parts), hydraulic lime (3 parts), water (2 parts)
- Hydrated Lime Mortar: Sand (3 parts), hydrated lime (2 parts), water (2 parts)
Concrete has the highest static resistance among all mixtures. When using two inert materials, it’s best to mix them together before adding the binding agent and then add water.
Proportions for Making Concrete
Here are the proportions for making concrete:
- Sand (5 parts)
- Gravel (9 parts)
- Cement (2 parts)
- Water (5 parts)
Concrete armature or cement-armored mortar preparation uses the same procedure as for concrete. The required proportions are:
- Sand (3 parts)
- Gravel (6 parts)
- Cement (2 parts)
- Water (1 part)
Refractory Mortar: A Specialized Mix
Refractory mortar is made from chamotte, a byproduct of refractory brick production, along with other inert materials and a binding agent. There are pre-mixed products available on the market that can be used to make refractory mortar by adding only water.
The Difference Between Thin Plaster and Thick Mortar
Thin plaster or “thin” mortar (malta magra) has more inert material than the standard mixture, resulting in less binding agent being used. In contrast, thick mortar (plaster grassa) uses more binding agent than the inert materials.
By following this comprehensive guide to proportions and dosages for making cement mortar, lime mortar, and bastard plaster, you’ll be well on your way to mastering the art of mortaring. Remember to always use the right proportions and consult an expert if you’re designing a load-bearing concrete structure.
Frequently Asked Questions
- What is the difference between cement mortar and lime mortar?
- Cement mortar is obtained from cement, while lime mortar is derived from hydraulic lime or hydrated lime (also known as quicklime).
- How do I make bastard plaster?
- To make bastard plaster, mix sand (10 parts), hydraulic lime (3 parts), cement (1 part), and water (3 parts) together.
- What are the proportions for making concrete armature or cement-armored mortar preparation?
- The required proportions are sand (3 parts), gravel (6 parts), cement (2 parts), and water (1 part).
- Can I use pre-mixed products to make refractory mortar?
- Yes, there are pre-mixed products available on the market that can be used to make refractory mortar by adding only water.
- What is the difference between thin plaster and thick mortar?
- Thin plaster or “thin” mortar (malta magra) has more inert material than the standard mixture, resulting in less binding agent being used. In contrast, thick mortar (plaster grassa) uses more binding agent than the inert materials.
- Do I need to consult an expert when designing a load-bearing concrete structure?
- Yes, it’s recommended that you consult an expert if you’re designing a load-bearing concrete structure due to its complexity and potential risks.
- Can I use resin to improve performance based on use?
- Yes, sometimes resin is added to improve the performance of mortar based on its intended application.
- What are the benefits of using hydraulic lime or hydrated lime (also known as quicklime)?
- Hydraulic lime or hydrated lime (also known as quicklime) has several benefits, including increased strength and durability in concrete structures.
Additional Tips for Mortar Mixing
Here are some additional tips to keep in mind when mixing mortar:
- Use the right tools: Invest in a good quality mixing bucket, trowel, and level to ensure accurate measurements and smooth application.
- Follow the recipe: Stick to the proportions outlined in this guide to achieve the best results.
- Monitor the mix: Keep an eye on the mixture’s consistency and adjust as needed to avoid lumps or unevenness.
- Use fresh materials: Ensure that all materials are fresh and of high quality to prevent spoilage or degradation.
By following these guidelines and tips, you’ll be well-equipped to create high-quality mortar for your construction projects.





