As a creative enthusiast, you’re probably always on the lookout for new ways to repurpose and reuse materials. In this tutorial, we’ll show you how to make your own decorative suckers using recycled materials that are easy to find. With our DIY socker guide, even those who don’t know how to freehand painting can achieve great results.
Materials Needed
To get started with this project, you’ll need the following materials:
- A sheet of sughero (sugru) from 2-3 mm thickness
- Gesso acrilico da stendere a pennello (acrylic paint)
- Paint markers
- Varnish on the table (optional)
- Rough twine
- Metal lids (recycled from glass bottles)
- Hot glue
- Scissors
- Paintbrushes of various sizes
- Stencil (optional)
A Beginner’s Guide to Making DIY Suckers
To speed up the process, you can prepare some decorative suckers by simply covering the metal lids with recycled materials like fabric, twine or plastic sheeting.
In this tutorial, we’ll use the metal lids as the base for our suckers anchored to a square base of sugru. Sugru is relatively inexpensive and easy to find in stores. For those who prefer online shopping, we recommend checking out Amazon.
Sucker Making Process
Cut the sugru into a square or rectangle shape.
First, cut the sugru to obtain a square. Ideal dimensions are 12×12 cm but if you’re making a mug, you can trim a rectangular piece where one side of the base will hold the spoon rest.
Repeat step 1.
When cutting the sugru, make sure not to break the edges. Sugru, regardless of its thickness, tends to crack easily, so it’s best to use a sharp cutter instead of scissors.
Attach the metal lid.
Once you have two bases of sugru, draw around the circumference of the metal lid on both. Cut out the circumference of the lid.
Decorate the complete sugru sheet.
At this point, you should have two squares (or rectangles) of sugru with one circular piece and a rim of equal size to the lid’s rim. Discard the circular piece and decorate the intact square or rectangle. Apply two coats of gesso acrilico using a flat-bristled paintbrush.
Let the first coat dry completely before proceeding.
Before applying the second coat, make sure that the first coat is completely dry. This will help prevent any unevenness in the finish.
Glue the circular piece to the square or rectangle sheet.
Apply one more coat of gesso acrilico to the circular piece and attach it to the base using hot glue. Make sure to center the circle or leave some space between the edges for decoration.
Attach the metal lid.
With hot glue, attach the metal lid on top of the circular piece that’s already been attached to the base. This will create a sturdy foundation for your sucker.
Apply varnish (optional).
To camouflage the metal lid, use a varnish specifically designed for tables. This is an optional step but recommended. The varnish will help protect the metal from scratches and fading.
Decorate.
Using freehand techniques or stencil designs, decorate your sucker’s surface. The gesso acrilico layer will make this process easier. You can also add additional details using paint markers or small paintbrushes.
Apply twine.
With hot glue, wrap the twine around your element (base and rim). If you prefer, apply a second coat of gesso acrilico on the twine as well. This will give your sucker a more rustic look.
Tips and Variations
- Use different colors and patterns for each sticker or paint design to create a unique look.
- Experiment with various materials like fabric scraps, ribbons, or even recycled buttons to decorate your suckers.
- Add some texture by incorporating natural elements like leaves, twigs, or flowers into the design.
- Create a personalized message or name on the sucker using paint markers or stencils.
Your DIY Sucker is Complete!
When the hot glue has dried completely, your sucker is ready to use. You can fill it with your favorite treats and enjoy its unique, handmade charm.
Common Mistakes to Avoid
- Not drying the first coat of gesso acrilico properly before applying the second coat.
- Overcrowding the sticker or paint design, which can make it look cluttered.
- Using low-quality materials that may not withstand heat or humidity.
- Not sealing the sucker with varnish, which can cause fading or scratches.
Conclusion
Making DIY suckers is a fun and creative project that requires minimal investment. With these simple steps and tips, you can create unique and personalized decorative suckers using recycled materials. Whether you’re looking for a unique gift or a way to add some personality to your home decor, this tutorial will guide you through the process.
Troubleshooting
If you encounter any issues during the making of your DIY sucker, here are some troubleshooting tips:
- If the sugru breaks easily, try using a different brand or type of sugru.
- If the gesso acrilico paint doesn’t adhere well to the metal lid, try applying a coat of varnish first.
- If the twine is too thick for your sucker’s rim, try using a thinner material like yarn or string.
Final Thoughts
With these simple steps and tips, you’re ready to start making your own decorative suckers. Remember to have fun and be creative with the process!





