Heating a single room or an entire house can be accomplished with the right calculation. Examples of calculations to determine how many kW your heating system will need to be well-dimensioned to meet your requirements.
If you’re designing a new heating system or simply choosing between a fireplace and a pellet stove, it’s useful to know how to calculate the heat demand of your home, so you can estimate the power of a potential boiler with radiators or a pellet stove.
Contents
- Heating a Single Room or an Entire House
- Calculating Thermal Power Required
2.1. Calculating Thermal Power Required for a Room or a House - Heat Demand and Domestic Heating
Heating a Single Room or an Entire House
Some models of fireplaces or stoves can warm up not only the room they are in, but also the entire house with significant energy savings and reduced utility bills. Fireplaces and stoves can integrate into existing heating systems or replace them entirely. There are many pellet boilers that can heat a two-story home.
Even those who need to replace their old boiler with a condensation boiler or combine it with an air conditioner, will have to calculate the required power.
It’s essential to mention that the calculation of thermal power described here does not take into account important factors like:
- Thermal dispersion generated by old infissi (partition walls)
- Windows
- Quality and type of doors and windows
- Presence of skylights
- Number of doors
- Exposure (orientation and aspect of the room)
- Presence of forced ventilation systems
In fact, in order to calculate the thermal power required to heat an environment, you need to consider factors such as:
- Coibentation/Insulation: The amount of insulation used in the walls, ceiling, and floor of the house.
- Number of windows: The number and type of windows, including their size, orientation, and glazing.
- Quality and type of doors and windows: The quality, size, and location of all doors and windows, as well as any thermal breaks or insulation used around them.
- Presence of skylights: Whether the house has skylights, and if so, how many and where they are located.
- Number of doors: How many doors are in each room, and what type of doors they are (e.g., metal, wood, glass).
- Exposure: The orientation and aspect of each room, as well as any windows or doors that receive direct sunlight.
- Presence of forced ventilation systems: Whether the house has a central heating system or a heat pump, and how it is connected to the rest of the building.
Additionally, the calculation makes many assumptions, so the estimate should be taken “with a pair of tweezers” and not considered as the only parameter for proper sizing of the heating system.
For example, the result obtained is expressed in kW but, unlike traditional boilers, the efficiency of a condensation boiler cannot be directly compared to that of a traditional boiler in terms of kW.
Calculating Thermal Power Required
The thermal power required to heat an environment is calculated from the volume of the room or house to be heated. The volume is expressed in cubic meters (m³) and can be easily calculated by multiplying the square footage of the room by its ceiling height.
For example, let’s calculate the thermal power required for a 75 m² apartment with a ceiling height of 2.70 meters:
Volume = 75 m² x 2.70 m = 202.5 m³
At this point, we need to multiply the volume by a medium coibentation coefficient (set at 0.05)
202.5 x 0.05 = 10.1 kW
It can be said that the thermal power required to heat the apartment of 75 m² is approximately 10.1 kWh.
Different Coibentation Values
To calculate the thermal power required, it’s necessary to have a coibentation coefficient for each room or area of the house. This value depends on various factors such as:
- Wall construction: The type and quality of materials used in the wall construction.
- Insulation: The amount and type of insulation used in the walls, ceiling, and floor of the house.
- Window size and orientation: The size and orientation of windows, including their glazing.
- Door size and location: The size and location of doors, as well as any thermal breaks or insulation used around them.
Here are some common coibentation values for different materials:
- Wall construction:
- Wooden walls with mineral wool insulation: 0.05
- Wooden walls with fiberglass insulation: 0.03
- Brick or stone walls with insulation: 0.10
- Ceiling and floor construction:
- Wooden ceilings and floors with insulation: 0.05
- Wooden ceilings and floors without insulation: 0.15
- Windows and doors:
- Single-glazed windows: 0.10
- Double-glazed windows: 0.02
- Triple-glazed windows: 0.01
It’s essential to note that these values are approximate and can vary depending on the specific materials used in the construction of your house.
Calculating Thermal Power Required for a Room or a House
To calculate the thermal power required, you’ll need to consider the following factors:
- Volume: The total volume of the room or house to be heated.
- Coibentation coefficient: The value representing the amount of insulation used in the walls, ceiling, and floor of the house.
- Window size and orientation: The size and orientation of windows, including their glazing.
- Door size and location: The size and location of doors, as well as any thermal breaks or insulation used around them.
- Exposure: The orientation and aspect of each room, as well as any windows or doors that receive direct sunlight.
Here’s a step-by-step guide to calculate the thermal power required for a room or house:
- Calculate the volume of the room or house to be heated by multiplying its square footage by its ceiling height.
- Choose a coibentation coefficient value based on the materials used in the construction of your house (see above).
- Multiply the volume by the coibentation coefficient to get the thermal power required.
Example Calculation
Let’s calculate the thermal power required for a 120 m² apartment with a ceiling height of 2.70 meters:
Volume = 120 m² x 2.70 m = 324 m³
Coibentation coefficient: 0.05 (medium coibentation)
Thermal power required = Volume x Coibentation coefficient
= 324 m³ x 0.05
= 16.2 kW
It can be said that the thermal power required to heat the apartment of 120 m² is approximately 16.2 kWh.
Heat Demand and Domestic Heating
When sizing a boiler, radiator or heating system, it’s essential not to forget two factors:
- The efficiency of the heating system: This refers to how well the heating system converts energy into heat.
- The degree of insulation of the house: This refers to how well-insulated the house is, which affects how much energy is lost through heat transfer.
Many installers of condensation boilers and pellet boilers offer free technical surveys before selling you an installation package. The technical survey is generally only offered for free if you buy the boiler that was originally recommended.
Radiators (traditional thermosiphons) are always a good choice, but a condensation boiler can provide better performance when using radiant panels, so with a floor or wall heating system.
Conclusion
Calculating the thermal power required to heat an environment is a complex task that requires careful consideration of various factors. By understanding these factors and following the steps outlined above, you can calculate the thermal power required for your room or house and choose the right heating system to meet your needs.
Remember to always consult with a professional if you’re unsure about any aspect of the calculation process. They can provide guidance and ensure that your heating system is properly sized and installed to maximize efficiency and minimize energy waste.





