In 2015, Regions in Italy began examining new methodologies for calculating energy performance and introducing minimum requirements for building energy efficiency. This marked a significant step towards sustainability, as the country sought to reduce its environmental impact and promote energy-efficient buildings.
As we’ve discussed in our previous article on Building Energy Certification, there is still no uniform framework across all regions in Italy. The introduction of new calculation methodologies and updated requirements for building energy efficiency has created confusion among designers, contractors, and policymakers. With the new decree, Regions aim to provide greater clarity and guidance for building energy certification.
The second draft of the inter-ministerial decree that outlines the application methods for calculating energy performance, utilizing renewable sources, and applying prescriptive measures and minimum requirements for building energy efficiency has been published on February 2nd, 2015. This draft is an impressive 42 pages long, with the Ministry of Economic Development suggesting it would be well-received.
The main objective of this decree is to enhance building energy efficiency by setting clear guidelines for energy performance calculation and introducing stricter minimum standards. The aim is to reduce energy consumption and environmental impact, while promoting sustainable development and economic growth.
Key Minimum Requirements for Building Energy Efficiency
The new decree sets key minimum requirements for building energy efficiency, which will take effect on July 1st, 2015. These requirements are designed to promote energy-efficient design and construction practices, reducing the energy consumption of buildings and lowering greenhouse gas emissions.
Some of the key features of the new minimum requirements include:
- Energy Performance Certification: A mandatory energy performance certification is required for all newly constructed and renovated buildings.
- Thermal Transmission Requirements: Thermal transmission requirements for various building components are postponed until January 1st, 2016, to give designers and contractors enough time to adapt to the new regulations.
- Renewable Energy Sources: Buildings must incorporate renewable energy sources, such as solar panels or wind turbines, to meet minimum energy efficiency standards.
- Insulation and Window Requirements: New buildings must meet specific insulation and window requirements to reduce heat loss and gain.
Strengthening Minimum Energy Efficiency Standards
The new decree strengthens minimum energy efficiency standards for newly constructed and renovated buildings. This will optimize cost-benefit ratios for the intervention to reach “Energy Almost Zero” buildings, as envisioned by the Directive.
The decree also aims to implement uniform application of norms across all Italian regions, ensuring that building energy certification is consistent and fair throughout the country.
Concept of “Energy Almost Zero Buildings”
The new decree defines the concept of “Energy Almost Zero Buildings,” setting a goal that all newly constructed buildings should be “energy almost zero” by December 31st, 2020. Public administration buildings are subject to an earlier deadline of December 31st, 2018.
Impact on Building Design and Construction
The decree aims to enhance building design, promoting more efficient use of resources and reducing environmental impact through stricter energy performance standards. This will require architects, engineers, and contractors to adopt innovative and sustainable design approaches, incorporating new technologies and materials into their work.
Thermal Transmission Requirements
Thermal transmission requirements for various building components are postponed until January 1st, 2016, to give designers and contractors enough time to adapt to the new regulations. This will enable them to consolidate new minimum energy performance standards with existing ones, qualifying for the 65% tax deduction.
Implementation Timeline
The new energy performance decree will enter into force on July 1st, 2015, with more severe standards applied to public buildings starting January 1st, 2019, and all other buildings starting January 1st, 2021.
Evaluations indicate that this new decree for building energy performance will lead to a significant improvement in energy efficiency, with an estimated 45% increase in index of energy performance in the hottest climate zones and a 35% boost in colder climates during the initial phase. In the second implementation phase, energy efficiency is expected to rise to 55% across all regions.
FAQs: Building Energy Performance Decree
- What does the new decree aim to achieve?
The decree aims to enhance building energy efficiency by setting clear guidelines for energy performance calculation and introducing stricter minimum standards, ultimately reducing energy consumption and environmental impact.
- When will key minimum requirements enter into force?
Key minimum requirements are set to take effect on July 1st, 2015, with more severe standards applied to public buildings starting January 1st, 2019, and all other buildings starting January 1st, 2021.
- What is the expected improvement in energy efficiency?
The decree aims for a significant increase in energy efficiency, with an estimated 45% boost in index of energy performance during the initial phase in hot climate zones and 35% in colder climates.
- When will “Energy Almost Zero Buildings” become mandatory?
All newly constructed buildings are expected to be “energy almost zero” by December 31st, 2020, with public administration buildings subject to an earlier deadline of December 31st, 2018.
- What is the significance of consolidating new minimum standards?
Consolidating new minimum energy performance standards with existing ones will enable regions to qualify for the 65% tax deduction and align with the Directive’s vision for “Energy Almost Zero” buildings.
- How will the decree impact building design and construction?
The decree aims to enhance building design, promoting more efficient use of resources and reducing environmental impact through stricter energy performance standards.
- What role does thermal transmission play in the new decree?
Thermal transmission requirements for various building components are postponed until January 1st, 2016, to give designers and contractors enough time to adapt to the new regulations.
- Will there be any further updates or revisions to the decree?
The ministry will continue to monitor and evaluate the effectiveness of the decree, potentially revising it as necessary to ensure Italy reaches its goal for “Energy Almost Zero” buildings.
Conclusion
The new energy performance decree for buildings marks a significant step towards sustainability in Italy. By setting clear guidelines for energy performance calculation and introducing stricter minimum standards, the decree aims to reduce energy consumption and environmental impact, while promoting sustainable development and economic growth.
As the country continues to implement this new decree, it is essential to monitor its effectiveness and make any necessary adjustments to ensure that Italy reaches its goal for “Energy Almost Zero” buildings. By working together, architects, engineers, contractors, and policymakers can create more efficient, sustainable, and environmentally friendly buildings, setting a positive example for the rest of the world.
In the coming years, it is likely that we will see further updates and revisions to this decree, as Italy continues to evolve and improve its energy efficiency standards. However, for now, the new decree provides a solid foundation for the country’s transition towards sustainable development, promoting energy-efficient buildings and reducing environmental impact across all regions.
The potential benefits of this decree are substantial, with an estimated 45% increase in index of energy performance in hot climate zones and 35% boost in colder climates during the initial phase. As we move forward, it will be essential to continue monitoring progress and making adjustments as necessary to ensure that Italy reaches its goal for “Energy Almost Zero” buildings.
By working together, we can create a more sustainable future, one building at a time.





